Wencon Pipe Tape
Wencon Pipe Tape is a fast curing pipe repair bandage especially formulated to make quick and effective repairs of cracks, leaks, fractures, and corrosion porosity in piping carrying water, oil, steam, most gases and even solvents. Wencon Pipe Tape has good pressure, temperature and chemical resistance.
Wencon Pipe Tape is a preimpregnated fiberglass bandage ready for use after soaking in water for 10 seconds. After 10 minutes cure the bandage hardens and the pipe can usually be reactivated. The bandage is fully cured within 1 hour.
- Quick and effective to use
- No mixing – No tools
- Water activated
- Ready for use in 10 seconds – Cures in 10 minutes
- Suitable for all pipes and surfaces
| Key technical data |
| Max temperature | +120°C |
| Apply with | Hand |
| Potlife at 20°C | 4-6 min. |
| Curing time | 10-30 min. |
| Machineability | No post curing machining necessary |
| Dielectric strength | N/A |
| Product number | Product name | IMPA no. | ISSA no. |
| No. 1044 | Wencon Pipe Tape, 2 units (10x350 cm) (4x140 inch) | 812328 | N/A |
| No. 1045 | Wencon Pipe Tape, 5 units (5x150 cm) (2x60 inch) | 812344 | 75.553.30 |
| No. 1046 | Wencon Pipe Tape, 4 units (5x350 cm) (2x140 inch) | 812348 | 75.553.31 |
| No. 1047 | Wencon Pipe Repair Kits, 2 units (5x150 cm) (2x60 inch) + putty (125gr) | N/A | N/A |
| No. 1048 | Wencon Pipe Repair Kits, 5 units (5x150 cm) (2x60 inch) + putty (125gr) | N/A | N/A |
Wencon Pipe Tape
Wencon Pipe Tape is a pre-impregnated fiberglass bandage with a knitted non-woven fiberglass structure, that gives the bandage maximum strength and facilitates repairs on corner joints, elbows and other shaped fittings.
The Wencon Pipe Tape is a fast curing pipe repair bandage especially formulated to make quick and effective repairs of cracks, leaks, fractures and corrosion porosity.
APPLICATION AREAS
Typical applications are repairs in piping carrying water, oil, steam, most gases and even solvents. Wencon Pipe Tape has good pressure, temperature and chemical resistance.
PACKAGING
Wencon Pipe Tape is available in 3 standard sizes:
- 5 cm x 150 cm (2x 60 inch.), designed for pipes up to 50 mm (2 inch) diameter
- 5 cm x 350 cm, (2x140 inch) designed for pipes up to 125 mm (5 inch) diameter
- 10 cm x 350 cm (4x140 inch) designed for pipes up to 200 mm (8 inch) diameter
The Wencon Pipe Repair Kit contains Wencon Putty, repair bandages, gloves and plastic bags.
GENERAL DESCRIPTION
A pre-impregnated fiberglass bandage for repair of cracks, leaks, fractures and corrosion porosity.
SURFACE PREPARATION
Prepare the surface by cleaning and abrading the area surrounding the damage.
Degreasing with Wencon Bio Cleaner will improve adhesion.
MIXING RATIO
No mixing is required.
Wencon Pipe Tape is pre impregnated with polyurethane resin and is water activated.
POT LIFE
3-6 minutes depending on air and water temperature.
APPLYING
ALWAYS WEAR PROTECTIVE GLOVES
Select the correct size Wencon Pipe Tape.
Prepare the surface by cleaning and grinding the area surrounding the damage.
Stop the leakage with Wencon Putty if necessary.
Unpack the Wencon Pipe Tape and soak it in water for 10 seconds.
Wrap the Wencon Pipe Tape firmly around the pipe with 50% overlap. A minimum of 9 complete windings is recommendable.
Continue to smoothen the surface and to apply pressure to the bandage with a wet- ted glove, until it stops bobbling and starts to cure. This is important for closing the pores.
For larger diameters, use a second bandage to complete the repair. Wencon Pipe Tape requires no tools.
CURING TIME
The bandage hardens in 10 minutes and is fully cured within 1 hour at 20°C (68°F)
MACHINABILITY
No post curing machining necessary.
TECHNICAL DATA
Pipe pressure without Wencon Putty: 10 Bar (145 p.s.i.) *)
Pipe pressure with Wencon Putty: 50 Bar (725 p.s.i.) *)
Flexural strength: ASTM D709 111 N/mmsq.
Tensile strength: ASTM D638 172 N/mmsq. (15,800 p.s.i.)
Compression strength: ASTM D695 180 N/ mmsq. (25,600 p.s.i.)
Adhesion at one-inch single overlap: 19 N/ mmsq.
Dielectric strength: 16 KV/mm
Shear adhesion: 19 N/mm2 (ASTM D1002)
TEMPERATURE RESISTANCE
Continuous: 120°C (248°F) Peak: 190°C (374°F)
CHEMICAL RESISTANCE
The Pipe Tape is resistant to oil, water, saltwater and most diluted acids and alkalis as well as a range of solvents.
SHELF LIFE
At 20°C (68°F) : 3 years
HANDLING PRECAUTIONS
Read the Wencon Instruction for Use and the Material Safety Data Sheet.
*) Laboratory tests have shown higher values, but the mentioned values will count for repairs done in situ. Users are advised to make their own tests if any doubt.
| Бренд | WENCON |
|---|---|
| Product Name | Wencon Pipe Tape |
ООО «Бастини»
Мы можем предложить широкий выбор оборудования, материалов и запасных частей в соответствии с высокими требованиями к качеству.
Bastini предлагает каждому клиенту услуги, адаптированные к его конкретным потребностям, исходя из нашего опыта поставок.
Bastini - надежный поставщик промышленных товаров и оборудования для обеспечения безопасности.
Наш ассортимент всегда обновляется и адаптируется к требованиям наших покупателей.
Все ваши запросы будут обработаны с максимальным вниманием и в короткие сроки.
Заказы будут упакованы и доставлены в кратчайшие сроки и отправлены в любую точку мира.
Наша компания известна как поставщик решений в цепочке поставок оборудования и логистике.
Адрес офиса 195279, Санкт-Петербург шоссе Революции, дом 69, лит.В, вход 2, офис 16
Телефоны: +7 (812) 458-35-97 ; +7 (921) 380-77-97
Email: office@bastini.ru